Soundproof Door Jamb Seals AJS-S11

Soundproof Door Jamb Seals AJS-S11

Remak® Soundproof Door Jamb Seals AJS-S11 is specially designed to seal and enhance soundproofing for double doors. The door jamb seals include a soft high elasticity silicone rubber gasket which is neatly hidden by the aluminum alloy frame. The product is suitable for most common double doors, from renovated old doors to newly installed doors, from wooden doors to steel doors.

  • Frame:Profiled aluminum alloy
  • Gasket:Silicone Rubber

Remak® Soundprood Door Jamb Seals AJS-S11 is a product system consisting of an elastic silicone rubber gasket fixed to a V-shaped aluminum alloy frame. The product works on a natural compression mechanism when the door is closed, the rubber gasket will be pressed tightly to the aluminum alloy frame, sealing all slots between the two doors, stop sound travelling the door slots.

The product is installed on the door at the opposite position of the two doors. For maximum sound insulation performance, install both of these soundproof gaskets to both 2 doors. The accessory can be easily installed with only manual tools such as hacksaw and screwdriver.

Our soundproofing double-doors jamb seals are designed to fit any door up to 2.3m in height without connecting the bars together. These jamb seals can be easily installed on any door system, wooden doors to steel doors.

Remak® Door Jamb Seals AJS-S11 has an anodized surface with anti-rust and anti-oxidation properties. The product is often used together with Soundproof door lock, Remak® Automatic Door Bottom and Remak® soundproof sills as an complete solution for soundproof door system.

 

Specifications


- Length: 2.300mm

- Dimensions: 22 x 24 x 2mm

- Maximum gap between 2 doors: 2.5mm -> 8mm

Soundproofing certificates:

AUS/NZ: NCC Spec. F5.5.

UK/EU: Approved Document E. Rated to BS EN ISO 717.1.

 

 

Sound transmission coefficient


The STC coefficient is measured on the standard Remak® Soundproof wooden double door system, including:

- 45mm thick soundproof double doors

- Remak® Soundproof Jamb Seals AJS-S11

- Remak® Heavy Duty Door Bottom ADB-B04.

- Remak® Soundproof Jamb Seals AJS-S11 .  Remak® Acoustic Door Lock set ADL8602-Y30X

 

 

Installation instructions


- Measure the dimensions of the door frame and shorten the jamb seal to the actual size.

- Create grooves at the installation location on the door and a groove with 2mm deep and 12mm wide along the height of the door.

- Install the Remak® Soundproof Jamb Seals AJS-S11 to the door with a screw.

- After installating, test close the door to ensure that all the gaps are sealed and the door can be easy to open or close.

 

 

GALERY